It is often encountered that customers have reported that the cross-country forklift will have a relatively large noise during operation. What is the reason for this problem? Next, I will reveal the confusion for everyone, and analyze the reasons for the excessive noise during the operation of the cross-country forklift:
1. Loose fasteners, body guide wheels and rollers, when the wear is severe, the gap is large.
2. The wear gap of the chain and the chain pin is too large or the gap between the upper and lower pins and the fork beam of the fork is too large.
3. Check whether the conflict between the guide wheel, the roller and the door frame is too large. Whether the cooperation gap between the fork and the fork beam is too large, these factors will cause the forklift to have a large noise during use.
In short, the reason for the noise generated by the off-road forklift is very large. The operator should drive the off-road forklift to the parking lot facility for special reasons. If necessary, please check with a professional forklift maintenance engineer to solve the forklift from the source. A question of loud noise.
For vehicles equipped with a scraper type oil filter, turn the handles 2 to 3 in a clockwise direction. Check the tire pressure and appearance to remove debris embedded in the tread. Clear the water and oil in the air reservoir and turn off the switch. Check the cooling system. In winter, pay attention to water release and freezing in severe cold areas.
Looking at the maintenance knowledge of so many forklifts is not a big increase in strength. With the maintenance skills of these forklifts, there is no need to worry about the frequent failure of the forklift, and the inspection and maintenance of the forklift often guarantees our work and life safety.
Of course, if you want to know more about forklift exams, training, safe driving, and operational skills. Please continue to pay attention to the website of Huaya Heavy Industry, let us protect your work and life.